INVADE Solution Changelog 2018
2018 Archive - Full Year.
Summary | Issue key | Issue id | Issue Type | Project key | Project name | Project type | Resolved | Fix versions | Description | DevOps Ticket |
---|---|---|---|---|---|---|---|---|---|---|
Confirmit multi-dialler support | INV6-38 | 10479 | Task | INV6 | genghis6 | software | 18/12/2018 11:02 | 6.4.6 | Genghis patch 6.4.6 for diallerAsm, ConfirmitDialler, ConfirmitLib and ConfirmitDiallerProxy. | |
add invade-genghis.conf config file template | INV6-40 | 10493 | Task | INV6 | genghis6 | software | 19/12/2018 10:01 | 6.4.7 | DEVOPS-167 | |
dialler main configuration file creation & content sorting improvements | INV6-39 | 10490 | Task | INV6 | genghis6 | software | 18/12/2018 11:02 | 6.4.6 | DEVOPS-167 | |
selective system status requests | WPFE-79 | 10480 | Task | WPFE | wp_front_end | software | 17/12/2018 11:21 | 1.6.6 | DEVOPS-171 | |
selective system status requests | WPVC-13 | 10481 | Task | WPVC | wp_vcsd_api | software | 17/12/2018 11:21 | 1.1.9 | DEVOPS-171 | |
Support for auto audio message after an AMD | INV6-37 | 10472 | Task | INV6 | genghis6 | software | 06/12/2018 15:39 | 6.4.5 | This feature supports the automatic playing of an audio message from the dialler to the call recipient after an AMD in a predictive or progressive call. At this point, it does not support the playing of a file following an Agent coding of AM. The nomination is done by adding a message file in an appropriate asterisk audio format. The message file should then be named with the same name as the campaign it applies to with a file extension reflecting the audio format. The file should then be placed in a directory common to all AMD audio (default /playback/AMDFiles). | DEVOPS-24 |
remove SupportingFolders from config | INV6-35 | 10453 | Task | INV6 | genghis6 | software | 28/11/2018 11:37 | 6.4.4 | DEVOPS-163 | |
remove ConfigTemplateDirectory from config | INV6-36 | 10454 | Task | INV6 | genghis6 | software | 28/11/2018 11:37 | 6.4.4 | DEVOPS-163 | |
rename folder to directory everywhere in the configuration file | INV6-34 | 10452 | Task | INV6 | genghis6 | software | 28/11/2018 11:36 | 6.4.4 | DEVOPS-164 | |
remove residual ConfigTemplates parameters | INV6-33 | 10446 | Task | INV6 | genghis6 | software | 27/11/2018 12:32 | 6.4.3 | DEVOPS-139 | |
fix MongoDataAcess exception | INV6-32 | 10445 | Task | INV6 | genghis6 | software | 27/11/2018 12:32 | 6.4.3 | DEVOPS-162 | |
move supporting folders to genghis service config section | INV6-30 | 10441 | Task | INV6 | genghis6 | software | 26/11/2018 11:09 | 6.4.2 | DEVOPS-160 | |
add option to disable mongodataaccess | INV6-29 | 10440 | Task | INV6 | genghis6 | software | 26/11/2018 11:09 | 6.4.2 | DEVOPS-144 | |
fix CampaignParams location | INV6-31 | 10442 | Task | INV6 | genghis6 | software | 26/11/2018 11:10 | 6.4.2 | DEVOPS-143 | |
remove asterisk config manager | INV6-28 | 10439 | Task | INV6 | genghis6 | software | 26/11/2018 11:09 | 6.4.2 | DEVOPS-139 | |
fix ccr report result count | WPDA-14 | 10436 | Task | WPDA | wp_dialler_api | software | 25/11/2018 20:55 | 1.1.11 | ||
fix rate update | WPDA-13 | 10435 | Task | WPDA | wp_dialler_api | software | 25/11/2018 20:55 | 1.1.11 | ||
fix date selection in call cost reports | WPFE-78 | 10434 | Task | WPFE | wp_front_end | software | 25/11/2018 20:52 | 1.6.5 | ||
call and agent search grouping columns renamed to reflect the value they show (agent) | WPFE-77 | 10429 | Task | WPFE | wp_front_end | software | 25/11/2018 20:52 | 1.6.5 | DEVOPS-150 | |
in searches the end date was not set to end of day time | WPFE-76 | 10426 | Task | WPFE | wp_front_end | software | 25/11/2018 20:52 | 1.6.5 | DEVOPS-151 | |
fix dialler assembly information display in vcsd section of WebPortal | WPFE-75 | 10425 | Task | WPFE | wp_front_end | software | 25/11/2018 20:52 | 1.6.5 | DEVOPS-154 | |
fix logging to show more information | WPCA-7 | 10433 | Task | WPCA | wp_cati_api | software | 25/11/2018 14:03 | 1.1.9 | DEVOPS-141 | |
fix logging to show more information | WPDA-12 | 10402 | Task | WPDA | wp_dialler_api | software | 15/11/2018 10:44 | 1.1.10 | DEVOPS-141 | |
fix logging to show more information | WPAC-10 | 10432 | Task | WPAC | wp_access_api | software | 25/11/2018 13:53 | 1.1.8 | DEVOPS-141 | |
removal of deprecated pako service | WPFE-74 | 10404 | Task | WPFE | wp_front_end | software | 15/11/2018 11:12 | 1.6.4 | ||
change ccr export file name to show formatted date rather than epoch time | WPFE-73 | 10403 | Task | WPFE | wp_front_end | software | 15/11/2018 10:52 | 1.6.3 | DEVOPS-140 | |
bug fix ccr reports should be searching for numbers starting with prefix and not containing the prefix | WPDA-11 | 10401 | Task | WPDA | wp_dialler_api | software | 15/11/2018 10:44 | 1.1.10 | DEVOPS-140 | |
Confirmit inbound Support | INV6-25 | 10388 | Task | INV6 | genghis6 | software | 08/11/2018 15:14 | 6.4.0 | Support for confirmit inbound: | DEVOPS-136 |
fix ConfirmIt inbound handling merge issues | INV6-27 | 10397 | Task | INV6 | genghis6 | software | 13/11/2018 15:40 | 6.4.1 | DEVOPS-29 | |
minor button styling change in telephony section & campaignstats sections | WPFE-72 | 10394 | Task | WPFE | wp_front_end | software | 12/11/2018 15:01 | 1.6.2 | DEVOPS-138 | |
pjsip implementation | INV6-26 | 10390 | Task | INV6 | genghis6 | software | 09/11/2018 10:27 | 6.4.0 | DEVOPS-29 | |
undo checks for NumberDecimal, as not required for normal operation | WPFE-71 | 10384 | Task | WPFE | wp_front_end | software | 08/11/2018 09:58 | 1.6.1 | DEVOPS-133 | |
adjustments for call cost report currency value interpretation | WPFE-70 | 10383 | Task | WPFE | wp_front_end | software | 07/11/2018 11:44 | 1.6.0 | DEVOPS-133 | |
package update including framework (Angular 7) | WPFE-69 | 10382 | Task | WPFE | wp_front_end | software | 07/11/2018 11:44 | 1.6.0 | Minor version increase due to use of Angular 7 | |
added default stun server to UA configuration | WPFE-60 | 10364 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Stats section fix | WPFE-62 | 10366 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Call outcome charts showing 0's instead of NO DATA | WPFE-63 | 10367 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
User update icon is now a floppy disk | WPFE-64 | 10368 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Cati Interviewer fix campaign list retrieval | WPFE-61 | 10365 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
fix duration display - must be (mm:ss) | WPFE-66 | 10370 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Ignore internal PJSIP port in WebPortal - in telephony channel section | WPFE-65 | 10369 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Rename columns in grids to make them more appropriate | WPFE-67 | 10371 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
Display dots for agent call, rec and monitor | WPFE-68 | 10372 | Task | WPFE | wp_front_end | software | 25/10/2018 14:32 | 1.5.13 | DEVOPS-126 | |
updated packages to latest versions | WPDA-10 | 10362 | Task | WPDA | wp_dialler_api | software | 24/10/2018 14:10 | 1.1.9 | DEVOPS-125 | |
improve StatusFile Binaries section to comply to JSON standards | INV6-24 | 10360 | Task | INV6 | genghis6 | software | 24/10/2018 13:44 | 6.3.20 | DEVOPS-118 | |
disable Confirmit by default | INV6-23 | 10359 | Task | INV6 | genghis6 | software | 24/10/2018 13:44 | 6.3.20 | ||
more config file template changes | WPFE-58 | 10347 | Task | WPFE | wp_front_end | software | 16/10/2018 13:58 | 1.5.11 | DEVOPS-117 | |
loopback config file change | WPFE-59 | 10348 | Task | WPFE | wp_front_end | software | 17/10/2018 09:32 | 1.5.12 | DEVOPS-117 | |
more config file template changes | WPFE-57 | 10346 | Task | WPFE | wp_front_end | software | 16/10/2018 13:25 | 1.5.10 | DEVOPS-117 | |
more changes to config file templates | WPFE-56 | 10345 | Task | WPFE | wp_front_end | software | 16/10/2018 13:16 | 1.5.9 | DEVOPS-117 | |
adjustments to config file templates | WPFE-55 | 10343 | Task | WPFE | wp_front_end | software | 16/10/2018 13:09 | 1.5.8 | DEVOPS-117 | |
phone service improvements | WPFE-53 | 10341 | Task | WPFE | wp_front_end | software | 16/10/2018 09:50 | 1.5.7 | DEVOPS-116 | |
desktop push notifications for incoming call | WPFE-51 | 10339 | Task | WPFE | wp_front_end | software | 16/10/2018 09:50 | 1.5.7 | DEVOPS-116 | |
incoming call ringtone | WPFE-52 | 10340 | Task | WPFE | wp_front_end | software | 16/10/2018 09:50 | 1.5.7 | DEVOPS-116 | |
fix invade-ra-client status display (moving from pm2) | WPFE-50 | 10336 | Task | WPFE | wp_front_end | software | 15/10/2018 10:58 | 1.5.6 | DEVOPS-114 | |
fix getting invade-ra-client status | WPVC-12 | 10337 | Task | WPVC | wp_vcsd_api | software | 15/10/2018 10:59 | 1.1.8 | DEVOPS-114 | |
remove unneeded callback which causing errors in console | WPFE-48 | 10331 | Task | WPFE | wp_front_end | software | 12/10/2018 11:46 | 1.5.5 | error noticed while testing | DEVOPS-105 |
update jssip package | WPFE-49 | 10332 | Task | WPFE | wp_front_end | software | 12/10/2018 11:46 | 1.5.5 | package needed an update | DEVOPS-105 |
fix for Cancelling out of the WP user creation process still results in the user being created. | WPFE-47 | 10330 | Task | WPFE | wp_front_end | software | 12/10/2018 11:46 | 1.5.5 | DEVOPS-105 | |
remove TempRecordingDirectory as deprecated property | INV6-21 | 10327 | Task | INV6 | genghis6 | software | 11/10/2018 11:28 | 6.3.18 | DEVOPS-112 | |
change PreConnectRecordingDirectory to adhere to standards | INV6-22 | 10328 | Task | INV6 | genghis6 | software | 11/10/2018 11:28 | 6.3.18 | DEVOPS-112 | |
dialled number not display when dialled | WPFE-46 | 10326 | Task | WPFE | wp_front_end | software | 11/10/2018 11:21 | 1.5.4 | DEVOPS-111 | |
internationalisation change for zh configuration | WPFE-44 | 10322 | Task | WPFE | wp_front_end | software | 11/10/2018 11:08 | 1.5.3 | DEVOPS-110 | |
changes to config templates to conform to standards | WPFE-45 | 10323 | Task | WPFE | wp_front_end | software | 11/10/2018 11:08 | 1.5.3 | DEVOPS-109 | |
make google fonts local rather than accessible via url | WPFE-42 | 10320 | Task | WPFE | wp_front_end | software | 11/10/2018 11:07 | 1.5.3 | DEVOPS-108 | |
additional checks for remoteLogging properties | WPFE-43 | 10321 | Task | WPFE | wp_front_end | software | 11/10/2018 11:07 | 1.5.3 | ||
add DiallerData to supporting folders list | INV6-20 | 10314 | Task | INV6 | genghis6 | software | 10/10/2018 10:36 | 6.3.17 | DEVOPS-102 | |
standardise logging | WPCA-6 | 10312 | Task | WPCA | wp_cati_api | software | 10/10/2018 10:14 | 1.1.8 | DEVOPS-106 | |
standardise logging | WPVC-11 | 10313 | Task | WPVC | wp_vcsd_api | software | 10/10/2018 10:15 | 1.1.7 | DEVOPS-106 | |
resolve mongoose deprecation warning | WPDA-9 | 10310 | Task | WPDA | wp_dialler_api | software | 10/10/2018 10:12 | 1.1.8 | resolve deprecation warning by using { useNewUrlParser: true } | DEVOPS-103 |
resolve mongoose deprecation warning | WPAC-9 | 10311 | Task | WPAC | wp_access_api | software | 10/10/2018 10:12 | 1.1.7 | DEVOPS-103 | |
add wp_logger_api url to loopback config | WPFE-41 | 10302 | Task | WPFE | wp_front_end | software | 08/10/2018 14:29 | 1.5.2 | DEVOPS-83 | |
update all packages used in wp_dialler_api to latest version | WPDA-8 | 10301 | Task | WPDA | wp_dialler_api | software | 08/10/2018 11:57 | 1.1.7 | some packages got out of date and needed to be brought up to speed | DEVOPS-99 |
add wp_logger_api configuration parameters to loopback configuration file | WPFE-40 | 10300 | Task | WPFE | wp_front_end | software | 08/10/2018 11:15 | 1.5.1 | DEVOPS-83 | |
Invade's inbuilt sofphone | WPFE-39 | 10298 | Task | WPFE | wp_front_end | software | 08/10/2018 11:00 | 1.5.0 | Full Support for INVADE Softphone to accompany INVADE CATI (Web RTC support) | |
added ws related user properties | WPAC-7 | 10297 | Task | WPAC | wp_access_api | software | 08/10/2018 10:54 | 1.1.6 | ||
remote logging improvements | WPFE-38 | 10292 | Task | WPFE | wp_front_end | software | 04/10/2018 15:38 | 1.4.9 | DEVOPS-83 | |
extra logging for rate card deletion | WPDA-7 | 10290 | Task | WPDA | wp_dialler_api | software | 04/10/2018 10:18 | 1.1.6 | DEVOPS-93 | |
adjust config template to include ffmpeg | WPDA-6 | 10289 | Task | WPDA | wp_dialler_api | software | 04/10/2018 10:18 | 1.1.6 | DEVOPS-93 | |
restructure dialler file structure to comply to linux standards | INV6-19 | 10288 | Task | INV6 | genghis6 | software | 04/10/2018 10:10 | 6.3.14 | DEVOPS-30 | |
Deskview pull to the right slightly | WPFE-37 | 10286 | Task | WPFE | wp_front_end | software | 03/10/2018 08:57 | 1.4.8 | DEVOPS-97 | |
Error section improvements - show number of new status messages | WPFE-36 | 10285 | Task | WPFE | wp_front_end | software | 03/10/2018 08:57 | 1.4.8 | DEVOPS-96 | |
Default bottom tab selection for selected closed campaign | WPFE-35 | 10284 | Task | WPFE | wp_front_end | software | 03/10/2018 08:57 | 1.4.8 | DEVOPS-97 | |
AgentSearch section remove export as it can be exported from withting the grid | WPFE-34 | 10283 | Task | WPFE | wp_front_end | software | 03/10/2018 08:57 | 1.4.8 | DEVOPS-97 | |
httpclient file download issue fixed (HttpClient needs to have responseType) | WPFE-33 | 10282 | Task | WPFE | wp_front_end | software | 03/10/2018 08:56 | 1.4.8 | DEVOPS-97 | |
show columns button for live campaign grid | WPFE-32 | 10281 | Task | WPFE | wp_front_end | software | 03/10/2018 08:56 | 1.4.8 | DEVOPS-97 | |
call cost reports table does not show some of the values | WPFE-31 | 10275 | Task | WPFE | wp_front_end | software | 26/09/2018 12:03 | 1.4.7 | spotted during demo | DEVOPS-92 |
Proposal : Replace SoX with FFmpeg | WPDA-1 | 10056 | Task | WPDA | wp_dialler_api | software | 27/09/2018 10:55 | 1.1.5 | Replace SoX with FFmpeg | DEVOPS-93 |
agent, call, campaign search grids are to auto resize automatically on load | WPFE-30 | 10274 | Task | WPFE | wp_front_end | software | 25/09/2018 11:17 | 1.4.6 | spotted on the demo server | DEVOPS-91 |
extra safety checks around incoming ws connection and sending out messages | INV6-18 | 10269 | Task | INV6 | genghis6 | software | 21/09/2018 13:27 | 6.3.13 | Some exceptions were spotted on one of the server. Added extra safety check which possibly will prevent issue from happening again. | DEVOPS-87 |
add option to enable OpenVPN authentication for user in User section | WPFE-29 | 10267 | Task | WPFE | wp_front_end | software | 21/09/2018 10:25 | 1.4.5 | DEVOPS-73 | |
enable openvpn user authentication | WPAC-6 | 10268 | Task | WPAC | wp_access_api | software | 21/09/2018 10:25 | 1.1.5 | DEVOPS-73 | |
add missing properties to config templates | WPFE-28 | 10265 | Task | WPFE | wp_front_end | software | 20/09/2018 13:38 | 1.4.4 | DEVOPS-88 | |
add catisim id to config template | ICSI-8 | 10263 | Task | ICSI | wp_cati_sim | software | 20/09/2018 08:57 | 1.0.11 | DEVOPS-86 | |
change default location for playback files ("/playback/PlayFiles") | INV6-17 | 10256 | Task | INV6 | genghis6 | software | 19/09/2018 12:36 | 6.3.12 | DEVOPS-79 | |
change default location for abandon file ("/playback/AbandonFiles") | INV6-16 | 10255 | Task | INV6 | genghis6 | software | 19/09/2018 12:36 | 6.3.12 | DEVOPS-78 | |
order server by name in VCSD section of the webportal | WPFE-27 | 10259 | Task | WPFE | wp_front_end | software | 19/09/2018 10:43 | 1.4.3 | DEVOPS-81 | |
agent search, call search and campaign search grids not displays a message for no results found and search in progress | WPFE-26 | 10254 | Task | WPFE | wp_front_end | software | 14/09/2018 16:24 | 1.4.2 | DEVOPS-80 | |
code restructuring for better readability and easier troubleshooting | WPFE-24 | 10250 | Task | WPFE | wp_front_end | software | 14/09/2018 15:55 | 1.4.1 | Spotted a need for code restructuring for better readability and easier troubleshooting | DEVOPS-85 |
fixes and improvements for CatiManager campaign management; closed campaign list was not showing correct closed campaigns opened using OpenApi | WPFE-25 | 10251 | Task | WPFE | wp_front_end | software | 14/09/2018 15:56 | 1.4.1 | Spotted a need to fix closed campaign list which was not showing correct closed campaigns opened using OpenApi | DEVOPS-85 |
expose InterfaceType to CampaignStats for use in WebPortal | INV6-15 | 10249 | Task | INV6 | genghis6 | software | 14/09/2018 15:53 | 6.3.11 | This change was prompted by a need to fix campaign management in CatiManager in WebPortal. It will also will be useful for multi Cati environments to identify which Cati has opened the campaign. | DEVOPS-84 |
update version of ag-grid to 19.0.0 | WPFE-21 | 10236 | Task | WPFE | wp_front_end | software | 13/09/2018 09:31 | 1.4.0 | This was triggered by the new release of Ag-Grid 19 which contains bug fixes and tool panel improvements. | DEVOPS-77 |
fix odd sized input fields across webportal | WPFE-22 | 10237 | Bug | WPFE | wp_front_end | software | 13/09/2018 09:32 | 1.4.0 | During the "testing" there was pointed out that some input fields are oddly shaped (font size & size of an element) and does not fit well within the webportal. | DEVOPS-77 |
enable filter tool panel where applicable across webportal | WPFE-23 | 10238 | Task | WPFE | wp_front_end | software | 13/09/2018 09:32 | 1.4.0 | The reason behind this change is the new ag-grid tool panel feature which allows to filter rows by certain values. Which will be beneficial to webportal user. | DEVOPS-77 |
loopback configuration change "{name of the node}" instead of TUNNELED | WPFE-20 | 10235 | Task | WPFE | wp_front_end | software | 12/09/2018 11:21 | 1.3.3 | DEVOPS-76 | |
change config template to accommodate new log folder location | WPVC-10 | 10222 | Task | WPVC | wp_vcsd_api | software | 05/09/2018 11:57 | 1.1.6 | DEVOPS-71 | |
change config template to accommodate new log folder location | WPDA-5 | 10221 | Task | WPDA | wp_dialler_api | software | 05/09/2018 11:55 | 1.1.4 | DEVOPS-71 | |
change config template to accommodate new log folder location | ICSI-7 | 10220 | Task | ICSI | wp_cati_sim | software | 05/09/2018 11:52 | 1.0.10 | DEVOPS-71 | |
change config template to accommodate new log folder location | WPCA-5 | 10219 | Task | WPCA | wp_cati_api | software | 05/09/2018 11:50 | 1.1.7 | DEVOPS-71 | |
change config template to accommodate new log folder location | WPAC-5 | 10215 | Task | WPAC | wp_access_api | software | 05/09/2018 11:36 | 1.1.4 | DEVOPS-71 | |
remove expressjs logging library - which produces stdout on each request | WPAC-4 | 10210 | Task | WPAC | wp_access_api | software | 03/09/2018 13:59 | 1.1.3 | DEVOPS-69 | |
remove residual console.log | ICSI-6 | 10206 | Task | ICSI | wp_cati_sim | software | 03/09/2018 13:38 | 1.0.9 | DEVOPS-67 | |
change dialler service name from invade-dialler to invade-genghis, used to restart dialler service from vcsd section in WebPortal | WPVC-9 | 10202 | Task | WPVC | wp_vcsd_api | software | 24/08/2018 14:08 | 1.1.5 | DEVOPS-62 | |
add dialler's StatusFile.txt location to config | WPVC-8 | 10201 | Task | WPVC | wp_vcsd_api | software | 24/08/2018 14:08 | 1.1.5 | DEVOPS-62 | |
DiallerStats.ReadCampaignHistories should produce WARN not an ERROR if DiallerData/Campaigns folder does not exist | INV6-14 | 10199 | Task | INV6 | genghis6 | software | 24/08/2018 13:43 | 6.3.10 | ERROR [ DiallerStats.ReadCampaignHistories ] Cannot find directory /var/lib/invade-genghis/DiallerData/Campaigns | DEVOPS-63 |
better websocket connection handling when disconnections and errors occur in wp_cati_api | WPCA-3 | 10168 | Task | WPCA | wp_cati_api | software | 16/08/2018 13:52 | 1.1.5 | DEVOPS-54 | |
better WebSocketServer event handling | ICSI-5 | 10194 | Task | ICSI | wp_cati_sim | software | 22/08/2018 13:20 | 1.0.8 | ||
remove console logging | WPAC-3 | 10184 | Task | WPAC | wp_access_api | software | 21/08/2018 11:45 | 1.1.2 | DEVOPS-44 | |
remove console logging | ICSI-4 | 10188 | Task | ICSI | wp_cati_sim | software | 21/08/2018 11:47 | 1.1.7 | DEVOPS-44 | |
remove console logging | WPCA-4 | 10187 | Task | WPCA | wp_cati_api | software | 21/08/2018 11:47 | 1.1.6 | DEVOPS-44 | |
remove console logging | WPVC-7 | 10186 | Task | WPVC | wp_vcsd_api | software | 21/08/2018 11:46 | 1.1.4 | DEVOPS-44 | |
remove console logging | WPDA-4 | 10185 | Task | WPDA | wp_dialler_api | software | 21/08/2018 11:46 | 1.1.3 | DEVOPS-44 | |
fix some input fields inherit incorrect style in webportal | WPFE-19 | 10181 | Task | WPFE | wp_front_end | software | 20/08/2018 11:07 | 1.3.2 | DEVOPS-60 | |
fix webportal scroll bar styling | WPFE-18 | 10180 | Task | WPFE | wp_front_end | software | 20/08/2018 11:07 | 1.3.2 | DEVOPS-59 | |
improve ws reconnection for wp_cati_sim | ICSI-3 | 10177 | Task | ICSI | wp_cati_sim | software | 17/08/2018 12:46 | 1.0.6 | ||
allow multiple ws connections to diallers openapi ws | INV6-13 | 10173 | Task | INV6 | genghis6 | software | 16/08/2018 15:12 | 6.3.9 | DEVOPS-56 | |
remove debug console.log's (residual from troubleshooting) | WPFE-17 | 10174 | Task | WPFE | wp_front_end | software | 16/08/2018 15:29 | 1.3.1 | DEVOPS-57 | |
Change icons styling for search sections in main left hand side navbar. | WPFE-16 | 10162 | Story | WPFE | wp_front_end | software | 15/08/2018 12:50 | 1.3.1 | DEVOPS-57 | |
add route to handle campaign summary search required for webportal | WPDA-3 | 10171 | Task | WPDA | wp_dialler_api | software | 16/08/2018 14:42 | 1.1.2 | DEVOPS-55 | |
user acl improvements for better user authentication handling in WebPortal | WPAC-2 | 10160 | Task | WPAC | wp_access_api | software | 15/08/2018 10:41 | 1.1.1 | ||
color coding for silent call % cells in campaign search section | WPFE-15 | 10157 | Task | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | DEVOPS-25 | |
introduced an campaign search section which will allow creating reports based on campaign session data | WPFE-12 | 10154 | Task | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | DEVOPS-25 | |
Pivot table reports | WPFE-2 | 10057 | Task | WPFE | wp_front_end | software | 14/08/2018 11:20 | 1.3.0 | I demoed today and wondered if pivot tables has disappeared as an option? Also, there is a very specific report that they want to run - at the end of each day they want to run a report that shows the activity for each interviewer (number of calls, talktime, time in wrap, hours etc.) across any campaigns they worked on. How would they go about doing this? | |
user acl improvements for better user authentication handling in WebPortal | WPFE-14 | 10156 | Task | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | ||
extra api calls for collecting agent and campaign data required for reporting and pivoting in WebPortal | WPFE-13 | 10155 | Task | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | ||
introduced an agent search section which will allow creating reports based on agent session data | WPFE-11 | 10153 | Task | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | ||
replace deprecated grid (ag-grid) theme stylesheets with current ones | WPFE-10 | 10152 | Bug | WPFE | wp_front_end | software | 14/08/2018 11:19 | 1.3.0 | ||
add option to restart Asterisk on dialler service restart, single and multi telephony server environments | INV6-11 | 10150 | Task | INV6 | genghis6 | software | 13/08/2018 10:46 | 6.3.8 | DEVOPS-49 | |
wrong segment call recording file extension is being taken for conversion. should be SegmentAudioFormat instead of AudioFormat | INV6-10 | 10115 | Task | INV6 | genghis6 | software | 07/08/2018 10:31 | 6.3.7 | DEVOPS-42 | |
fix mongodb connection url, it should include database that it connects to | WPCA-2 | 10112 | Task | WPCA | wp_cati_api | software | 07/08/2018 10:10 | 1.1.4 | ||
improvements for wp_front_end in order to accomodate slower configuration load times | WPFE-9 | 10110 | Task | WPFE | wp_front_end | software | 07/08/2018 10:04 | 1.2.7 | DEVOPS-47 | |
name change from invade-cati_sim to wp_cati_sim, in order to conform to naming convention | ICSI-2 | 10109 | Task | ICSI | wp_cati_sim | software | 07/08/2018 08:43 | 1.0.5 | ||
wp_vcsd_api will now detect HA cluster and node states (Active/Passive). For passive nodes options to restart asterisk and dialler will be disabled. | WPVC-4 | 10045 | Task | WPVC | wp_vcsd_api | software | 01/08/2018 09:52 | 1.1.2 | if [[ $(cl_status rscstatus) == "all" ]] ; then echo "Active" ; elif [[ $(cl_status rscstatus) == "none" ]] ; then echo "Passive" ; else echo "HA Cluster Broken" ; fi | DEVOPS-7 |
dialler service name change from invade-dialler to invade-genghis for VCSD usage | WPVC-6 | 10092 | Task | WPVC | wp_vcsd_api | software | 01/08/2018 12:24 | 1.1.3 | DEVOPS-35 | |
Change invade-genghis to invade-dialler for VCSD usage | WPVC-5 | 10065 | Task | WPVC | wp_vcsd_api | software | 16/07/2018 15:13 | 1.1.1 | Change invade-genghis to invade-dialler | DEVOPS-27 |
retrieve closed campaigns in descending order by start date from database for use in Web Portal closed campaign list | WPDA-2 | 10101 | Task | WPDA | wp_dialler_api | software | 04/08/2018 11:57 | 1.1.1 | DEVOPS-43 | |
pre-creation of campaign collections for Cati Manager | WPCA-1 | 10071 | Task | WPCA | wp_cati_api | software | 19/07/2018 13:41 | 1.1.3 | ||
fix displaying port ids for stats, additional information for WebPortal | INV6-8 | 10097 | Task | INV6 | genghis6 | software | 03/08/2018 10:09 | 6.3.5 | WPFE-6 | |
set stricter permissions on the main dialler configuration file (mono-service.conf) | INV6-6 | 10082 | Bug | INV6 | genghis6 | software | 30/07/2018 14:01 | 6.3.0 | set stricter permissions on the main dialler configuration file | DEVOPS-22 |
enable support for Asterisk AMI 4.0.3 | INV6-5 | 10076 | Task | INV6 | genghis6 | software | 20/07/2018 08:34 | 6.3.3 | enable support for ami 4.0.3 | |
removal of unused internationalisation configuration properties | INV6-4 | 10075 | Task | INV6 | genghis6 | software | 20/07/2018 08:34 | 6.3.3 | removal of unused configuration properties | DEVOPS-5 |
Initial release of Cati simulator in the WebPortal | ICSI-1 | 10070 | Task | ICSI | wp_cati_sim | software | 19/07/2018 13:39 | 1.0.4 | Initial release | |
removal of unused packages left from devel | WPFE-8 | 10105 | Task | WPFE | wp_front_end | software | 06/08/2018 10:42 | 1.2.6 | ||
restart asterisk in multi telephony server environments when dialler service is being restarted | INV6-9 | 10102 | Task | INV6 | genghis6 | software | 06/08/2018 10:18 | 6.3.6 | DEVOPS-45 | |
fix displaying of ports for multiple servers | WPFE-6 | 10096 | Task | WPFE | wp_front_end | software | 06/08/2018 10:10 | 1.2.5 | DEVOPS-43 | |
internationalisation improvements | WPFE-7 | 10103 | Task | WPFE | wp_front_end | software | 06/08/2018 10:10 | 1.2.5 | ||
remove misleading snackbar in "AllAgents" section | WPFE-5 | 10095 | Task | WPFE | wp_front_end | software | 06/08/2018 10:10 | 1.2.5 | ||
enable OpenApi by default | INV6-7 | 10093 | Task | INV6 | genghis6 | software | 01/08/2018 12:33 | 6.3.4 | DEVOPS-36 | |
display status of HA node and disable restarting of dialler & asterisk on passive node | WPFE-4 | 10090 | Task | WPFE | wp_front_end | software | 01/08/2018 12:06 | 1.2.4 | ||
update licensing | WPFE-3 | 10069 | Task | WPFE | wp_front_end | software | 19/07/2018 12:35 | 1.2.3 |