"WARNING - Restrict to limited access and can only granted to the user account of trained personnel."
VCSD is a section available from the side menu available to authorised & INVADE trained users only.
VCSD is a powerful tool that contains additional tabs for various self administration tools
VCSD default page header
Server Administration
Title VCSD = current module you are viewing
Icons top right 
= INVADE Solution connected
User 
= Currently logged on Username and INVADE Solution Web Portal Version, with the ability to 'Logoff'
Key - Module & Info
OS = The operating system used by the INVADE Solution (native to Linux Red Hat)
Remote Access = INVADE Solution remote access tool (for onsite / VM / private cloud. INVADE Cloud Solution will show a 
Asterisk = The Asterisk (Telephony platform) version installed and running information
Dialler = The Version of the INVADE Solution Components
Key - Status
= Not active
= Active
Key - Actions
= Shut Down the service
= Restart the service
Using the VCSD interface
VCSD has to 'Actions' that can take place
Shut Down By confirming this action you will shut down the service associated with this button. WARNING - this action can only be reverted with manual intervention on a physical server or via a virtual environment control panel, such as vSphere.
Restart 
By confirming this action you will restart the service associated with this button. WARNING - This action can only be used in the correct order
Once an Action Button has been clicked you will receive a warning message and confirmation is required to continue.
SIP Endpoints
This section will display all configured SIP endpoints on the server. Each row in the grid represents a configured SIP endpoint. Row color represent state of the endpoint.
Green - connected and in active call.
Yellow - registered but not in active call.
Red - configured and unregistered SIP endpoint
It is possible to right click on any registered and active extension to get a menu option “Trace” which will navigate to the next section “Ping/Trace” for further analysis of the extensions IP address.
Ping/Trace
This section allows to ping and trace an IP address from the dialler server.
The result of “Ping/Trace” will contains all the ping and traceroute information, including hops.
Packet Capture
This section enables you to run packet captures on the dialler server. Configuration of the trace allows you to set the following parameters:
Capture type - there is a predefined set of packet capture ports which will be configure by Invade. There is an option to switch to “Advanced” mode to specify required ports for the packet capture manually.
Capture size - the size of the packet capture files
Rotation count - the number of files to rotate in order to safe disk space
Auto stop - allows you to specify auto stop timer which will stop the packet capture.
The packet captures can be stopped manually by clicking “Stop” button, they will be stopped by “Auto stop” timer or the packet capture process is kill on the server. Once stopped the tool will create an archive of packet capture files which can be downloaded by clicking on “Download”
AWS VPN(s)
This section will provide information about the linked AWS VPN tunnels. *if applicable
OpenVPN(s)
This section will provide information about all connected OpenVPN clients. *if applicable
NOTE. Training on the INVADE VCSD is available through the customer support desk and is part of the SLA as a remote teaching session.